Angular Contact Ball Bearing

Home » Products » Rolling Mill Bearings » Angular Contact Ball Bearing
Angular Contact Ball Bearing

Angular contact ball bearing can withstand the combined load of mainly radial and axial load and torque load. It is mainly used in the shaft and shell component which restricts the bidirectional axial displacement. Our product has limited tilt between the inner ring and outer ring. The range of tilt angle depends on the bearing internal clearance, the bearing size, internal design and the forces and moments acting on the bearing. The maximum allowable tilt angle should ensure that the bearing does not produce high additional stress. However, the tilt angle will affect the bearing lifespan, decline the bearing running accuracy and magnify running noise.

Angular contact ball bearing usually adopts nylon or solid brass cage. Although it can bear bidirectional axial load, we should pay attention not to let the main axial load pass through the notched side if one side has filling gap during the installation. We should let the main axial load pass through the raceway without filling gap.

Technical Parameters of Angular Contact Ball Bearing
Type Designation Inner Diameter (mm) d Outer Diameter (mm) d Thickness (mm) b
double row 5217 a-2z 85.0000 150.0000 49.2000
double row 5217 e 85.0000 150.0000 49.2000
double row 3317 a 85.0000 180.0000 73.0000
double row 5317 a 85.0000 180.0000 73.0000
double row 3218 a 90.0000 160.0000 52.4000
double row 5218 a-2z 90.0000 160.0000 52.4000
double row 5218 e 90.0000 160.0000 52.4000
double row 3318 a 90.0000 190.0000 73.0000
double row 3318 dma 90.0000 190.0000 73.0000
double row 5318 a 90.0000 190.0000 73.0000
double row 3219 a 95.0000 170.0000 55.6000
double row 5219 a 95.0000 170.0000 55.6000
double row 3319 a 95.0000 200.0000 77.8000
double row 3319 dma 95.0000 200.0000 77.8000
double row 305397 d 100.0000 170.0000 60.3000
double row 3220 a 100.0000 180.0000 60.3000
double row 5220 a 100.0000 180.0000 60.3000
double row 3320 a 100.0000 215.0000 82.6000
double row 3320 dma 100.0000 215.0000 82.6000
double row 3222 a 110.0000 200.0000 69.8000
double row 5222 a 110.0000 200.0000 69.8000
double row 3322 a 110.0000 240.0000 92.1000
double row 3322 dma 110.0000 240.0000 92.1000
double row 305283 da 150.0000 230.0000 70.0000
double row 305248 150.0000 240.0000 84.0000
double row 305608 a 160.0000 215.0000 56.0000
double row 305183 160.0000 240.0000 76.0000
double row 305180 170.0000 260.0000 84.0000
double row 305351 175.0000 280.0000 92.0000
double row 305288 da 180.0000 250.0000 70.0000
double row 305455 b 180.0000 250.0000 70.0000
double row 305172 b 180.0000 280.0000 92.0000
double row 305609 a 190.0000 255.0000 66.0000
double row 305338 da 190.0000 269.5000 66.0000
double row 305178 190.0000 290.0000 92.0000
double row 305237 a 200.0000 280.0000 76.0000
double row 305393 200.0000 280.0000 80.0000
double row 305263 da 200.0000 289.5000 76.0000
double row 305352 200.0000 310.0000 96.0000
double row 305610 a 220.0000 300.0000 76.0000
double row 305272 da 220.0000 309.5000 76.0000
double row 305611 a 250.0000 340.0000 76.0000
double row 305270 d 260.0000 369.5000 92.0000
double row 305174 b 260.0000 400.0000 130.0000
double row 305269 d 280.0000 389.5000 92.0000
double row ba2b 309984 650.0000 780.0000 84.0000
double row ba2b 311631 900.0000 1030.0000 135.0000
double row ba2b 311495 1000.0000 1170.0000 140.0000

We are a specialized angular contact ball bearing manufacturer in China. We provide various types of products such as wheel bearing, open deep groove ball bearing, cylindrical roller bearing, and single row tapered roller bearing.

Feedback Form
Other Products
  • Four Row Taper Roller BearingFour row tapered roller bearing is successfully used in the bearings of the rolling mills with a low to medium rolling speed around the world. The bearing can not only bear radial load, but also bear the axial load appeared in the applications due to its design, and the bearing generally does not need additional thrust bearing. This means that the roll neck can be relatively short, and the roll bearing seat on both sides ...
  • Four Row Cylindrical Roller BearingFour row cylindrical roller bearing has separate structure, and its bearing ring and rolling element components can be easily separated. Therefore, bearing cleaning, inspection and assembly and disassembly are very convenient. Our product has two series which are FC and FCD. FC type bearing consists of two outer rings and a inner ring.